Press Kit: 2018 Dodge Challenger SRT Demon

2018 Dodge Challenger SRT Demon Powertrain Fact Sheet

Auburn Hills, Mich. June 2, 2017 - Details about the supercharged 6.2-liter HEMI® V-8 and powertrain in the 2018 Dodge Challenger SRT Demon:

Displacement: Supercharged 6.2-liter V-8

Construction: Deep-skirt cast iron block; aluminum alloy heads with hemispherical combustion chamber

Output:
  • 840 bhp (626 kW) @ 6,300 rpm; 770 lb.-ft (1,044 N•m) @ 4,500 rpm with Direct Connection Controller and unleaded 100 octane minimum fuel
  • 808 bhp (603 kW) @ 6,300 rpm; 717 lb.-ft (972 N•m) @ 4,500 rpm with Premium 91 octane fuel

Production site: Saltillo Engine Plant, Ramos Arizpe, Mexico
  • 62 percent new content compared with Hellcat V-8: engine block; crankshaft; pistons; connecting rods; supercharger
  • Cylinder heads machined on dedicated Demon/Hellcat CNC machines
  • Engine block is deck plate honed to minimize bore distortion
  • Every Demon and Hellcat engine is dyno tested for 42 minutes under load up to 5,200 rpm before being shipped to assembly plant in Brampton, Ontario
 
More air: Largest functional hood scoop opening (45.2 square inches) and triple-inlet air box (903.1 cubic inches). High flow, low restriction inlet system designed to deliver cool air into the supercharger.

Air-flow rate: 1,150 cubic feet per minute

SRT Power Chiller™: Redirects air conditioning refrigerant from cabin to chiller unit; reduces charge air temperature by 18 degrees Fahrenheit
 
Supercharger:
  • Twin screw, 2.7 liters per revolution
  • Rotors 1.1 inches longer compared with Hellcat
  • Maximum boost pressure 14.5 psi compared with 11.6 psi for Hellcat
  • Dual water/air heat exchangers integrated into supercharger housing
  • Electric pump flows up to 11.9 gallons per minute
 
Engine internals:
  • Forged alloy steel crankshaft with 90.9-millimeter stroke and revised balancing
  • Induction-hardened crank bearing surfaces; individual journal optimized main bearing clearances
  • Forged high-strength alloy pistons; 30-micron increased piston to bore clearance
  • Powder forged connecting rods; upgraded shank and big end; revised ultra-high tensile fasteners
  • Flow doubled on piston cooling oil jets
  • Revised design valve springs
  • 33 percent increase in oiling for valve springs and rocker tips – lubrication and cooling
  • Single-groove collets on valve stems for improved stability
  • Fuel injector pressure increased 27 percent
  • Oil pan and windage tray optimized for high acceleration – tested up to 1.8 g
 
Transmission: TorqueFlite 8HP90 eight-speed automatic
  • Upgraded automatic transmission torque converter increases torque multiplication 18 percent
  • Torque converter stall speed increased 11 percent
  • In Drag Mode, transmission minimizes torque cut during gear changes – 400 millisecond shifts
 
Drivetrain:
  • Limited-slip differential
  • 230-millimeter ring gear in high strength alloy, heat-treated aluminum differential housing
  • 3.09 final drive ratio for maximum acceleration
  • 20-percent thicker prop shaft made of high strength, low alloy steel tube; high strength steel stub shafts
  • Upgraded halfshafts with 8-ball Cross-Glide inner and outer joints; larger diameter barshafts with 41-spline count; high alloy steel inner and outer stub shafts
  • Nitto drag radial tires achieve up to 40 percent more launch force
 
Fun facts:
  • During a quarter-mile run, the Demon V-8 ingests 173 cubic feet of air. That’s equivalent to the lung capacity of 816 humans.
  • 800 feet into a quarter-mile run, the Demon V-8 would empty all the air in the cabin of the Dodge Challenger SRT Demon – 105 cubic feet
  • Demon V-8 cooling system rejects 258 kW of heat at rated power – that would boil 1 quart of water at room temperature in 1.2 seconds. The heat rejected is equal to 250 electric toasters.
  • At rated power, high-octane fuel flows at 1.36 gallons per minute. Typical shower head flows at 2 gallons per minute
  • On each power stroke, piston and connecting rod is loaded with 11 tons of force – equivalent of 5 2018 Dodge Challenger SRT Demons. This happens more than 50 times a second @ 6,300 rpm.
  • Torque Reserve and TransBrake combined generate 317 lb.-ft. of incremental torque, for total launch torque of 534 lb.-ft.
  • The driveline sees 11,164 lb.-ft. of ring gear torque at launch. Results in a 1.8 g launch.
  • More than 1 ton (2,500 pounds) transferred from front to rear wheels at launch

Dodge//SRT
For 110 years, the Dodge brand has carried on the spirit of brothers John and Horace Dodge. Their influence continues today as Dodge, America’s performance brand, shifts into high gear with a lineup that delivers unrivaled performance in each of the segments in which the brand competes while moving forward to a future that includes electrified muscle in the form of the next-generation, all-new Dodge Charger.

The next-generation Dodge Charger electrifies a legend, with the Charger retaining its title as the world’s quickest and most powerful muscle car led by the all-new, all-electric 2024 Dodge Charger Daytona Scat Pack. The all-new Dodge Charger will also offer performance choices via multi-energy powertrain options including the 550-horsepower Dodge Charger SIXPACK H.O., powered by the 3.0L Twin Turbo Hurricane High Output engine.

Dodge also keeps its foot on the gas as a pure performance brand with the 710-horsepower Dodge Durango SRT Hellcat, the most powerful SUV ever, and best-in-class standard performance in the compact utility vehicle segment with the Dodge Hornet.

Dodge is part of the portfolio of brands offered by leading global automaker and mobility provider Stellantis. For more information regarding Stellantis (NYSE: STLA), please visit www.stellantis.com.

Follow Dodge//SRT and company news and video on:
Company blog: http://blog.stellantisnorthamerica.com
Media website: http://media.stellantisnorthamerica.com
Dodge brand: www.dodge.com
Direct Connection: www.DCPerformance.com
DodgeGarage: www.dodgegarage.com
Facebook: www.facebook.com/dodge
Instagram: www.instagram.com/dodgeofficial
Twitter: www.twitter.com/dodge and @StellantisNA
YouTube: www.youtube.com/dodge, https://www.youtube.com/StellantisNA

Contact Information

Dan Reid
Office: (248) 512-0366
Cell: (248) 202-7697
Kristin Starnes
Cell: (248) 202-9906

Press Kit Contents

Download Video Embed